Your location:Home > News > Company News > Five steps for correct installation and use of high frequency electroplating power supply

Five steps for correct installation and use of high frequency electroplating power supply

Publisher: Administrator Date:2021-03-05

How to install and use our high frequency electroplating power supply when you buy it? The following editor will give you a brief introduction.
Five steps for correct installation and use of high-frequency electroplating power supply:
Step 1: Fix the high-frequency electroplating power supply.
It is recommended to fix the high-frequency electroplating power supply beside or above the electroplating tank board, which can make the future operation relatively convenient.
Step 2: Connect the output positive and negative poles.
Connect the electroplating positive and negative electrodes you have prepared in advance to the output positive and negative positions behind the high-frequency electroplating power supply. It is recommended to fix them with stainless steel screws.
The third step: connect the filter, swing machine, heating tube and other equipment.
If your customized high-frequency electroplating power supply has these functions, please connect the corresponding equipment to the wiring block behind the high-frequency electroplating power supply. The wiring block has the corresponding identification, and you can connect according to the identification. If your customized rectifier does not have these functions, please ignore this step.
Step 4: Connect the power cord of the high-frequency electroplating power supply.
Connect the power cord of the high-frequency electroplating power supply to the power supply (220V or 380V, depending on the input voltage of your high-frequency electroplating power supply), it is recommended to adopt a fixed connection method, and it is not recommended to use a socket connection. When performing this step, be sure to turn off the power to ensure safety.
Step 5: Turn on the power supply.
After ensuring that the high-frequency electroplating power supply is installed correctly, it can be used after turning on the power supply.
Home About Us Products Cases News Strength Contact Us
Tel:13410606757
E-mail:494801671@qq.com
Add:101, No.101,Sanjianzai Street, Minzhu Community, Shajing Street, Baoan District, Shenzhen
Website:www.zhengliujis.com
CopyRight © 2021 Shenzhen sanxinda Power Equipment Co., Ltd. All Rights Reserved.
粤ICP备2021014040号

QR CODE

Online
Service

ConsultationTime:9:00-18:00

Select customer service:

Hot
Line

13410606757
7*24H Service

Follow
Us

Website
TOP